EE313 Linear Systems and Signals - Homeworks
Please submit the computer program (e.g. in Matlab or LabVIEW)
that you wrote and/or modified to complete each assignment.
If the computer program is a modification of computer programs
in the Signals and Systems book, then you could choose
to report the changes you made to the Matlab code in the book
instead of printing out all of the code.
Assignments -
To Be Assigned -
LabVIEW
- No additional homeworks are to be assigned.
In this course, you'll make heavy use of either MATLAB or
the LabVIEW Mathscript utility to run the code in the textbook.
LabVIEW is available free of charge to all UT Austin students,
staff and faculty as part of the university site license.
Install LabVIEW.
Please install core disk 1 and core disk 2.
LabVIEW installation disks are also available from the College
of Engineering ITS department on the first floor of ECJ.
The following resources would also be helpful (but not required) in
using LabVIEW:
For the Matlab code that comes with the textbook, you can
configure the Mathscript interface to use that code as follows:
- Copy the .m files into a folder on your computer.
- Open the Mathscript window in LabVIEW by going to the
Tools menu and select "Mathscript Window" (third entry).
- In the Mathscript window, go the File menu and select
"LabVIEW MathScript Properties".
- Add the folder containing the .m files from the book to
the search path.
Last updated 07/10/17.
Send comments to
bevans@ece.utexas.edu