|
Aim of the Experiment :
The aim of the experiment is to familiarize you with the following:
- C6000 instruction set architecture
- C6713 DSP Starter Kit (DSK) boards
- TI Code Composer Studio software tools
- LabVIEW
- Matlab
Equipment to be checked out :
- Two BNC - stereo pin (DSP) cables
All the above equipment can be checked out from the checkout in the second floor.
The above list of equipment is the equipment required per work station.
Deviations from the laboratory manual :
- All the projects should be maintained in the directory D:/MyProjects
- Copy all header(s) and library files into this
directory, they should be included in your project from here
- You can get the libaries and headers needed for you program from
your TAs.
- Always be sure to backup all your files. The files will be
deleted when the computer is shut down. Loss of files is not an acceptable
excuse for not submitting assignments on time.
Useful references:
Recitation Slides
by Mr. Wael Barakat, The University of Texas at Austin
Overview Slides
by Prof. Steven Tretter, University of Maryland
Online Multimedia Tutorial on LabVIEW (35 minutes)
Introduction to LabVIEW 8.0 Materials (3 hours)
Lab 1 Report
Submitting the lab 1 report that answers the questions below
is mandatory to obtain credit for this lab
Assignment
Back to the course home page
Next Experiment |