#-----------------------------------------------------------
# Vivado v2022.2 (64-bit)
# SW Build 3671981 on Fri Oct 14 04:59:54 MDT 2022
# IP Build 3669848 on Fri Oct 14 08:30:02 MDT 2022
# Start of session at: Sun Mar 31 22:36:50 2024
# Process ID: 1977102
# Current directory: /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2
# Command line: vivado
# Log file: /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/vivado.log
# Journal file: /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/vivado.jou
# Running On: koopa.ece.utexas.edu, OS: Linux, CPU Frequency: 3900.000 MHz, CPU Physical cores: 32, Host memory: 404275 MB
#-----------------------------------------------------------
start_gui
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vek280_es:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vek280/es/1.0/board.xml as part xcve2802-vsvh1760-2lp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vhk158_es:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vhk158/es/1.0/board.xml as part xcvh1582-vsva3697-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vpk120_es:part0:1.2 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vpk120/es/1.2/board.xml as part xcvp1202-vsva2785-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vpk120_es_revb:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vpk120_revb/es/1.0/board.xml as part xcvp1202-vsva2785-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vpk180_es:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vpk180/es/1.0/board.xml as part xcvp1802-lsvc4072-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu208ld:part0:2.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu208ld/production/2.0/board.xml as part xczu58dr-fsvg1517-2-i specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu216ld:part0:2.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu216ld/production/2.0/board.xml as part xczu59dr-ffvf1760-2-i specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu670:part0:2.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu670/2.0/board.xml as part xczu67dr-fsve1156-2-i specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu670ld:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu670ld/1.0/board.xml as part xczu57dr-fsve1156-2-i specified in board_part file is either invalid or not available
open_project /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.xpr
Scanning sources...
Finished scanning sources
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1700] Loaded user IP repository '/misc/scratch/dna664/lab3/new_baseline1/ip_repo'.
INFO: [IP_Flow 19-2313] Loaded Vivado IP repository '/usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/ip'.
open_project: Time (s): cpu = 00:00:16 ; elapsed = 00:00:09 . Memory (MB): peak = 7310.305 ; gain = 183.574 ; free physical = 221494 ; free virtual = 354515
update_compile_order -fileset sources_1
open_bd_design {/misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.srcs/sources_1/bd/ultra96v2_oob/ultra96v2_oob.bd}
Reading block design file </misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.srcs/sources_1/bd/ultra96v2_oob/ultra96v2_oob.bd>...
Adding component instance block -- xilinx.com:ip:proc_sys_reset:5.0 - rst_ps8_0_100M
Adding component instance block -- xilinx.com:ip:xlconcat:2.1 - xlconcat_0
Adding component instance block -- xilinx.com:ip:zynq_ultra_ps_e:3.4 - zynq_ultra_ps_e_0
Adding component instance block -- xilinx.com:ip:axi_gpio:2.0 - axi_gpio_3
Adding component instance block -- xilinx.com:ip:system_management_wiz:1.3 - system_management_wiz_0
Adding component instance block -- xilinx.com:ip:axi_gpio:2.0 - axi_gpio_0
Adding component instance block -- xilinx.com:ip:axi_gpio:2.0 - axi_gpio_1
Adding component instance block -- xilinx.com:ip:xlslice:1.0 - xlslice_0
Adding component instance block -- xilinx.com:ip:xlslice:1.0 - xlslice_1
Adding component instance block -- xilinx.com:ip:xlslice:1.0 - xlslice_2
Adding component instance block -- xilinx.com:ip:xlslice:1.0 - xlslice_3
Adding component instance block -- xilinx.com:ip:xlslice:1.0 - xlslice_4
Adding component instance block -- xilinx.com:ip:xlslice:1.0 - xlslice_5
Adding component instance block -- xilinx.com:ip:xlslice:1.0 - xlslice_6
Adding component instance block -- xilinx.com:ip:xlslice:1.0 - xlslice_7
Adding component instance block -- xilinx.com:ip:xlslice:1.0 - xlslice_8
Adding component instance block -- xilinx.com:ip:xlslice:1.0 - xlslice_9
Adding component instance block -- xilinx.com:ip:axi_gpio:2.0 - axi_gpio_2
Adding component instance block -- xilinx.com:ip:axi_uart16550:2.0 - axi_uart16550_0
Adding component instance block -- xilinx.com:ip:axi_uart16550:2.0 - axi_uart16550_1
Adding component instance block -- user.org:user:PWM_w_Int:1.0 - PWM_w_Int_1
Adding component instance block -- user.org:user:PWM_w_Int:1.0 - PWM_w_Int_0
Adding component instance block -- ecelrc:user:Capture_Timer:1.0 - Capture_Timer_0
Adding component instance block -- xilinx.com:ip:smartconnect:1.0 - smartconnect_1
Adding component instance block -- ecelrc:user:SHA3_BURST_MASTER:1.0 - SHA3_BURST_MASTER_0
Successfully read diagram <ultra96v2_oob> from block design file </misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.srcs/sources_1/bd/ultra96v2_oob/ultra96v2_oob.bd>
ipx::edit_ip_in_project -upgrade true -name SHA3_BURST_MASTER_v1_0_project -directory /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.tmp/SHA3_BURST_MASTER_v1_0_project /misc/scratch/dna664/lab3/new_baseline1/ip_repo/SHA3_BURST_MASTER_1_0/component.xml
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1704] No user IP repositories specified
INFO: [IP_Flow 19-2313] Loaded Vivado IP repository '/usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/ip'.
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vek280_es:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vek280/es/1.0/board.xml as part xcve2802-vsvh1760-2lp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vhk158_es:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vhk158/es/1.0/board.xml as part xcvh1582-vsva3697-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vpk120_es:part0:1.2 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vpk120/es/1.2/board.xml as part xcvp1202-vsva2785-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vpk120_es_revb:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vpk120_revb/es/1.0/board.xml as part xcvp1202-vsva2785-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vpk180_es:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vpk180/es/1.0/board.xml as part xcvp1802-lsvc4072-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu208ld:part0:2.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu208ld/production/2.0/board.xml as part xczu58dr-fsvg1517-2-i specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu216ld:part0:2.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu216ld/production/2.0/board.xml as part xczu59dr-ffvf1760-2-i specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu670:part0:2.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu670/2.0/board.xml as part xczu67dr-fsve1156-2-i specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu670ld:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu670ld/1.0/board.xml as part xczu57dr-fsve1156-2-i specified in board_part file is either invalid or not available
create_project: Time (s): cpu = 00:00:10 ; elapsed = 00:00:31 . Memory (MB): peak = 7866.902 ; gain = 0.000 ; free physical = 223381 ; free virtual = 356345
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1700] Loaded user IP repository '/misc/scratch/dna664/lab3/new_baseline1/ip_repo'.
INFO: [IP_Flow 19-795] Syncing license key meta-data
ipx::edit_ip_in_project: Time (s): cpu = 00:00:13 ; elapsed = 00:00:33 . Memory (MB): peak = 7866.902 ; gain = 0.000 ; free physical = 223357 ; free virtual = 356322
update_compile_order -fileset sources_1
WARNING: [filemgmt 56-315] Source scanning failed during design analysis. To get more details run synthesis or simulation and check the log.
WARNING: [filemgmt 56-315] Source scanning failed during design analysis. To get more details run synthesis or simulation and check the log.
ipx::merge_project_changes files [ipx::current_core]
WARNING: [IP_Flow 19-5226] Project source file '/misc/scratch/dna664/lab3/new_baseline1/ip_repo/SHA3_BURST_MASTER_1_0/component.xml' ignored by IP packager.
ipx::merge_project_changes files [ipx::current_core]
WARNING: [IP_Flow 19-5226] Project source file '/misc/scratch/dna664/lab3/new_baseline1/ip_repo/SHA3_BURST_MASTER_1_0/component.xml' ignored by IP packager.
set_property core_revision 30 [ipx::current_core]
ipx::update_source_project_archive -component [ipx::current_core]
ipx::create_xgui_files [ipx::current_core]
ipx::update_checksums [ipx::current_core]
ipx::check_integrity [ipx::current_core]
INFO: [IP_Flow 19-2181] Payment Required is not set for this core.
INFO: [IP_Flow 19-2187] The Product Guide file is missing.
INFO: [Ipptcl 7-1486] check_integrity: Integrity check passed.
ipx::save_core [ipx::current_core]
ipx::move_temp_component_back -component [ipx::current_core]
close_project -delete
update_ip_catalog -rebuild -repo_path /misc/scratch/dna664/lab3/new_baseline1/ip_repo
INFO: [IP_Flow 19-725] Reloaded user IP repository '/misc/scratch/dna664/lab3/new_baseline1/ip_repo'
report_ip_status -name ip_status 
upgrade_ip -vlnv ecelrc:user:SHA3_BURST_MASTER:1.0 [get_ips  ultra96v2_oob_SHA3_BURST_MASTER_0_3] -log ip_upgrade.log
Upgrading '/misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.srcs/sources_1/bd/ultra96v2_oob/ultra96v2_oob.bd'
INFO: [IP_Flow 19-3422] Upgraded ultra96v2_oob_SHA3_BURST_MASTER_0_3 (SHA3_BURST_MASTER_v1.0 1.0) from revision 29 to revision 30
Wrote  : </misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.srcs/sources_1/bd/ultra96v2_oob/ultra96v2_oob.bd> 
INFO: [Coretcl 2-1525] Wrote upgrade log to '/misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ip_upgrade.log'.
upgrade_ip: Time (s): cpu = 00:00:02 ; elapsed = 00:00:06 . Memory (MB): peak = 7866.902 ; gain = 0.000 ; free physical = 223030 ; free virtual = 356017
export_ip_user_files -of_objects [get_ips ultra96v2_oob_SHA3_BURST_MASTER_0_3] -no_script -sync -force -quiet
report_ip_status -name ip_status 
reset_run synth_1
launch_runs impl_1 -to_step write_bitstream -jobs 64
INFO: [xilinx.com:ip:smartconnect:1.0-1] ultra96v2_oob_smartconnect_1_0: SmartConnect ultra96v2_oob_smartconnect_1_0 is in Low-Area Mode.
WARNING: [xilinx.com:ip:smartconnect:1.0-1] ultra96v2_oob_smartconnect_1_0: IP ultra96v2_oob_smartconnect_1_0 is configured in Low-area mode as all propagated traffic is low-bandwidth (AXI4LITE). SI S00_AXI has property HAS_BURST == 1. WRAP bursts are not supported in Low-area mode and will result in DECERR if received.
WARNING: [xilinx.com:ip:smartconnect:1.0-1] ultra96v2_oob_smartconnect_1_0: IP ultra96v2_oob_smartconnect_1_0 is configured in Low-area mode as all propagated traffic is low-bandwidth (AXI4LITE). SI S01_AXI has property HAS_BURST == 1. WRAP bursts are not supported in Low-area mode and will result in DECERR if received.
WARNING: [xilinx.com:ip:smartconnect:1.0-1] ultra96v2_oob_smartconnect_1_0: If WRAP transactions are required then turn off Low-area mode using ADVANCED_PROPERTIES. Execute following: set_property CONFIG.ADVANCED_PROPERTIES {__experimental_features__ {disable_low_area_mode 1}} [get_bd_cells /ultra96v2_oob_smartconnect_1_0]
WARNING: [BD 41-237] Bus Interface property WUSER_WIDTH does not match between /zynq_ultra_ps_e_0/S_AXI_LPD(0) and /SHA3_BURST_MASTER_0/M00_AXI(1)
WARNING: [BD 41-237] Bus Interface property RUSER_WIDTH does not match between /zynq_ultra_ps_e_0/S_AXI_LPD(0) and /SHA3_BURST_MASTER_0/M00_AXI(1)
WARNING: [BD 41-237] Bus Interface property BUSER_WIDTH does not match between /zynq_ultra_ps_e_0/S_AXI_LPD(0) and /SHA3_BURST_MASTER_0/M00_AXI(1)
WARNING: [BD 41-2671] The dangling interface net <m00_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m01_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m02_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m03_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m04_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m05_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m06_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m07_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m08_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m09_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m10_aw_node_M_AXIS_ARB> will not be written out to the BD file.
Wrote  : </misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.srcs/sources_1/bd/ultra96v2_oob/ultra96v2_oob.bd> 
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/SHA3_BURST_MASTER_0/m00_axi_rid'(1) to pin: '/zynq_ultra_ps_e_0/saxigp6_rid'(6) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/zynq_ultra_ps_e_0/saxigp6_awid'(6) to pin: '/SHA3_BURST_MASTER_0/m00_axi_awid'(1) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/zynq_ultra_ps_e_0/saxigp6_arid'(6) to pin: '/SHA3_BURST_MASTER_0/m00_axi_arid'(1) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/SHA3_BURST_MASTER_0/m00_axi_bid'(1) to pin: '/zynq_ultra_ps_e_0/saxigp6_bid'(6) - Only lower order bits will be connected.
Verilog Output written to : /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.gen/sources_1/bd/ultra96v2_oob/synth/ultra96v2_oob.v
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/SHA3_BURST_MASTER_0/m00_axi_rid'(1) to pin: '/zynq_ultra_ps_e_0/saxigp6_rid'(6) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/zynq_ultra_ps_e_0/saxigp6_awid'(6) to pin: '/SHA3_BURST_MASTER_0/m00_axi_awid'(1) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/zynq_ultra_ps_e_0/saxigp6_arid'(6) to pin: '/SHA3_BURST_MASTER_0/m00_axi_arid'(1) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/SHA3_BURST_MASTER_0/m00_axi_bid'(1) to pin: '/zynq_ultra_ps_e_0/saxigp6_bid'(6) - Only lower order bits will be connected.
Verilog Output written to : /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.gen/sources_1/bd/ultra96v2_oob/sim/ultra96v2_oob.v
Verilog Output written to : /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.gen/sources_1/bd/ultra96v2_oob/hdl/ultra96v2_oob_wrapper.v
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_nodes/s00_ar_node/s_sc_payld'(181) to pin: '/s00_nodes/S_SC_AR_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_nodes/s00_aw_node/s_sc_payld'(181) to pin: '/s00_nodes/S_SC_AW_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_nodes/s01_ar_node/s_sc_payld'(181) to pin: '/s01_nodes/S_SC_AR_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_nodes/s01_aw_node/s_sc_payld'(181) to pin: '/s01_nodes/S_SC_AW_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_nodes/m00_r_node/s_sc_payld'(58) to pin: '/m00_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_nodes/m00_b_node/s_sc_payld'(12) to pin: '/m00_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_nodes/m01_r_node/s_sc_payld'(58) to pin: '/m01_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_nodes/m01_b_node/s_sc_payld'(12) to pin: '/m01_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_nodes/m02_r_node/s_sc_payld'(58) to pin: '/m02_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_nodes/m02_b_node/s_sc_payld'(12) to pin: '/m02_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_nodes/m03_r_node/s_sc_payld'(58) to pin: '/m03_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_nodes/m03_b_node/s_sc_payld'(12) to pin: '/m03_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_nodes/m04_r_node/s_sc_payld'(58) to pin: '/m04_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_nodes/m04_b_node/s_sc_payld'(12) to pin: '/m04_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m05_nodes/m05_r_node/s_sc_payld'(58) to pin: '/m05_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m05_nodes/m05_b_node/s_sc_payld'(12) to pin: '/m05_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m06_nodes/m06_r_node/s_sc_payld'(58) to pin: '/m06_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m06_nodes/m06_b_node/s_sc_payld'(12) to pin: '/m06_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m07_nodes/m07_r_node/s_sc_payld'(58) to pin: '/m07_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m07_nodes/m07_b_node/s_sc_payld'(12) to pin: '/m07_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m08_nodes/m08_r_node/s_sc_payld'(58) to pin: '/m08_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m08_nodes/m08_b_node/s_sc_payld'(12) to pin: '/m08_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m09_nodes/m09_r_node/s_sc_payld'(58) to pin: '/m09_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m09_nodes/m09_b_node/s_sc_payld'(12) to pin: '/m09_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m10_nodes/m10_r_node/s_sc_payld'(58) to pin: '/m10_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m10_nodes/m10_b_node/s_sc_payld'(12) to pin: '/m10_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_axi2sc/s_sc_r_payld'(56) to pin: '/s00_nodes/M_SC_R_payld'(58) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_axi2sc/s_sc_b_payld'(10) to pin: '/s00_nodes/M_SC_B_payld'(12) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_axi2sc/s_sc_r_payld'(56) to pin: '/s01_nodes/M_SC_R_payld'(58) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_axi2sc/s_sc_b_payld'(10) to pin: '/s01_nodes/M_SC_B_payld'(12) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_sc2axi/s_sc_ar_payld'(177) to pin: '/m00_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_sc2axi/s_sc_aw_payld'(177) to pin: '/m00_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_sc2axi/s_sc_ar_payld'(177) to pin: '/m01_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_sc2axi/s_sc_aw_payld'(177) to pin: '/m01_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_sc2axi/s_sc_ar_payld'(177) to pin: '/m02_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_sc2axi/s_sc_aw_payld'(177) to pin: '/m02_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_sc2axi/s_sc_ar_payld'(177) to pin: '/m03_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_sc2axi/s_sc_aw_payld'(177) to pin: '/m03_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_sc2axi/s_sc_ar_payld'(177) to pin: '/m04_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_sc2axi/s_sc_aw_payld'(177) to pin: '/m04_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m05_sc2axi/s_sc_ar_payld'(177) to pin: '/m05_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m05_sc2axi/s_sc_aw_payld'(177) to pin: '/m05_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m06_sc2axi/s_sc_ar_payld'(177) to pin: '/m06_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m06_sc2axi/s_sc_aw_payld'(177) to pin: '/m06_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m07_sc2axi/s_sc_ar_payld'(177) to pin: '/m07_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m07_sc2axi/s_sc_aw_payld'(177) to pin: '/m07_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m08_sc2axi/s_sc_ar_payld'(177) to pin: '/m08_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m08_sc2axi/s_sc_aw_payld'(177) to pin: '/m08_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m09_sc2axi/s_sc_ar_payld'(177) to pin: '/m09_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m09_sc2axi/s_sc_aw_payld'(177) to pin: '/m09_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m10_sc2axi/s_sc_ar_payld'(177) to pin: '/m10_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m10_sc2axi/s_sc_aw_payld'(177) to pin: '/m10_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_nodes/s00_ar_node/s_sc_payld'(181) to pin: '/s00_nodes/S_SC_AR_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_nodes/s00_aw_node/s_sc_payld'(181) to pin: '/s00_nodes/S_SC_AW_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_nodes/s01_ar_node/s_sc_payld'(181) to pin: '/s01_nodes/S_SC_AR_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_nodes/s01_aw_node/s_sc_payld'(181) to pin: '/s01_nodes/S_SC_AW_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_nodes/m00_r_node/s_sc_payld'(58) to pin: '/m00_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_nodes/m00_b_node/s_sc_payld'(12) to pin: '/m00_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_nodes/m01_r_node/s_sc_payld'(58) to pin: '/m01_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_nodes/m01_b_node/s_sc_payld'(12) to pin: '/m01_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_nodes/m02_r_node/s_sc_payld'(58) to pin: '/m02_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_nodes/m02_b_node/s_sc_payld'(12) to pin: '/m02_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_nodes/m03_r_node/s_sc_payld'(58) to pin: '/m03_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_nodes/m03_b_node/s_sc_payld'(12) to pin: '/m03_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_nodes/m04_r_node/s_sc_payld'(58) to pin: '/m04_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_nodes/m04_b_node/s_sc_payld'(12) to pin: '/m04_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m05_nodes/m05_r_node/s_sc_payld'(58) to pin: '/m05_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m05_nodes/m05_b_node/s_sc_payld'(12) to pin: '/m05_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m06_nodes/m06_r_node/s_sc_payld'(58) to pin: '/m06_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m06_nodes/m06_b_node/s_sc_payld'(12) to pin: '/m06_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m07_nodes/m07_r_node/s_sc_payld'(58) to pin: '/m07_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m07_nodes/m07_b_node/s_sc_payld'(12) to pin: '/m07_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m08_nodes/m08_r_node/s_sc_payld'(58) to pin: '/m08_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m08_nodes/m08_b_node/s_sc_payld'(12) to pin: '/m08_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m09_nodes/m09_r_node/s_sc_payld'(58) to pin: '/m09_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m09_nodes/m09_b_node/s_sc_payld'(12) to pin: '/m09_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m10_nodes/m10_r_node/s_sc_payld'(58) to pin: '/m10_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m10_nodes/m10_b_node/s_sc_payld'(12) to pin: '/m10_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_axi2sc/s_sc_r_payld'(56) to pin: '/s00_nodes/M_SC_R_payld'(58) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_axi2sc/s_sc_b_payld'(10) to pin: '/s00_nodes/M_SC_B_payld'(12) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_axi2sc/s_sc_r_payld'(56) to pin: '/s01_nodes/M_SC_R_payld'(58) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_axi2sc/s_sc_b_payld'(10) to pin: '/s01_nodes/M_SC_B_payld'(12) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_sc2axi/s_sc_ar_payld'(177) to pin: '/m00_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_sc2axi/s_sc_aw_payld'(177) to pin: '/m00_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_sc2axi/s_sc_ar_payld'(177) to pin: '/m01_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_sc2axi/s_sc_aw_payld'(177) to pin: '/m01_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_sc2axi/s_sc_ar_payld'(177) to pin: '/m02_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_sc2axi/s_sc_aw_payld'(177) to pin: '/m02_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_sc2axi/s_sc_ar_payld'(177) to pin: '/m03_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_sc2axi/s_sc_aw_payld'(177) to pin: '/m03_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_sc2axi/s_sc_ar_payld'(177) to pin: '/m04_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_sc2axi/s_sc_aw_payld'(177) to pin: '/m04_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
INFO: [Common 17-14] Message 'BD 41-2384' appears 100 times and further instances of the messages will be disabled. Use the Tcl command set_msg_config to change the current settings.
Exporting to file /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.gen/sources_1/bd/ultra96v2_oob/ip/ultra96v2_oob_smartconnect_1_0/bd_0/hw_handoff/ultra96v2_oob_smartconnect_1_0.hwh
Generated Hardware Definition File /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.gen/sources_1/bd/ultra96v2_oob/ip/ultra96v2_oob_smartconnect_1_0/bd_0/synth/ultra96v2_oob_smartconnect_1_0.hwdef
INFO: [BD 41-1029] Generation completed for the IP Integrator block SHA3_BURST_MASTER_0 .
Exporting to file /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.gen/sources_1/bd/ultra96v2_oob/hw_handoff/ultra96v2_oob.hwh
Generated Hardware Definition File /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.gen/sources_1/bd/ultra96v2_oob/synth/ultra96v2_oob.hwdef
[Sun Mar 31 23:02:35 2024] Launched synth_1...
Run output will be captured here: /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.runs/synth_1/runme.log
[Sun Mar 31 23:02:35 2024] Launched impl_1...
Run output will be captured here: /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.runs/impl_1/runme.log
launch_runs: Time (s): cpu = 00:00:36 ; elapsed = 00:00:47 . Memory (MB): peak = 8037.758 ; gain = 138.133 ; free physical = 222761 ; free virtual = 355665
report_ip_status -name ip_status 
ipx::edit_ip_in_project -upgrade true -name SHA3_BURST_MASTER_v1_0_project -directory /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.tmp/SHA3_BURST_MASTER_v1_0_project /misc/scratch/dna664/lab3/new_baseline1/ip_repo/SHA3_BURST_MASTER_1_0/component.xml
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1704] No user IP repositories specified
INFO: [IP_Flow 19-2313] Loaded Vivado IP repository '/usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/ip'.
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vek280_es:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vek280/es/1.0/board.xml as part xcve2802-vsvh1760-2lp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vhk158_es:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vhk158/es/1.0/board.xml as part xcvh1582-vsva3697-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vpk120_es:part0:1.2 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vpk120/es/1.2/board.xml as part xcvp1202-vsva2785-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vpk120_es_revb:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vpk120_revb/es/1.0/board.xml as part xcvp1202-vsva2785-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vpk180_es:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vpk180/es/1.0/board.xml as part xcvp1802-lsvc4072-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu208ld:part0:2.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu208ld/production/2.0/board.xml as part xczu58dr-fsvg1517-2-i specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu216ld:part0:2.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu216ld/production/2.0/board.xml as part xczu59dr-ffvf1760-2-i specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu670:part0:2.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu670/2.0/board.xml as part xczu67dr-fsve1156-2-i specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu670ld:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu670ld/1.0/board.xml as part xczu57dr-fsve1156-2-i specified in board_part file is either invalid or not available
create_project: Time (s): cpu = 00:00:04 ; elapsed = 00:00:45 . Memory (MB): peak = 8037.758 ; gain = 0.000 ; free physical = 222529 ; free virtual = 355565
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1700] Loaded user IP repository '/misc/scratch/dna664/lab3/new_baseline1/ip_repo'.
INFO: [IP_Flow 19-795] Syncing license key meta-data
ipx::edit_ip_in_project: Time (s): cpu = 00:00:06 ; elapsed = 00:00:47 . Memory (MB): peak = 8037.758 ; gain = 0.000 ; free physical = 222543 ; free virtual = 355579
update_compile_order -fileset sources_1
current_project ultra96v2_oob
current_project SHA3_BURST_MASTER_v1_0_project
ipx::merge_project_changes files [ipx::current_core]
WARNING: [IP_Flow 19-5226] Project source file '/misc/scratch/dna664/lab3/new_baseline1/ip_repo/SHA3_BURST_MASTER_1_0/component.xml' ignored by IP packager.
set_property core_revision 31 [ipx::current_core]
ipx::update_source_project_archive -component [ipx::current_core]
ipx::create_xgui_files [ipx::current_core]
ipx::update_checksums [ipx::current_core]
ipx::check_integrity [ipx::current_core]
INFO: [IP_Flow 19-2181] Payment Required is not set for this core.
INFO: [IP_Flow 19-2187] The Product Guide file is missing.
INFO: [Ipptcl 7-1486] check_integrity: Integrity check passed.
ipx::save_core [ipx::current_core]
ipx::move_temp_component_back -component [ipx::current_core]
close_project -delete
update_ip_catalog -rebuild -repo_path /misc/scratch/dna664/lab3/new_baseline1/ip_repo
INFO: [IP_Flow 19-725] Reloaded user IP repository '/misc/scratch/dna664/lab3/new_baseline1/ip_repo'
report_ip_status -name ip_status 
upgrade_ip -vlnv ecelrc:user:SHA3_BURST_MASTER:1.0 [get_ips  ultra96v2_oob_SHA3_BURST_MASTER_0_3] -log ip_upgrade.log
Upgrading '/misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.srcs/sources_1/bd/ultra96v2_oob/ultra96v2_oob.bd'
INFO: [IP_Flow 19-3422] Upgraded ultra96v2_oob_SHA3_BURST_MASTER_0_3 (SHA3_BURST_MASTER_v1.0 1.0) from revision 30 to revision 31
Wrote  : </misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.srcs/sources_1/bd/ultra96v2_oob/ultra96v2_oob.bd> 
INFO: [Coretcl 2-1525] Wrote upgrade log to '/misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ip_upgrade.log'.
upgrade_ip: Time (s): cpu = 00:00:02 ; elapsed = 00:00:25 . Memory (MB): peak = 8037.758 ; gain = 0.000 ; free physical = 222509 ; free virtual = 355544
export_ip_user_files -of_objects [get_ips ultra96v2_oob_SHA3_BURST_MASTER_0_3] -no_script -sync -force -quiet
report_ip_status -name ip_status 
reset_run synth_1
launch_runs impl_1 -to_step write_bitstream -jobs 64
INFO: [xilinx.com:ip:smartconnect:1.0-1] ultra96v2_oob_smartconnect_1_0: SmartConnect ultra96v2_oob_smartconnect_1_0 is in Low-Area Mode.
WARNING: [xilinx.com:ip:smartconnect:1.0-1] ultra96v2_oob_smartconnect_1_0: IP ultra96v2_oob_smartconnect_1_0 is configured in Low-area mode as all propagated traffic is low-bandwidth (AXI4LITE). SI S00_AXI has property HAS_BURST == 1. WRAP bursts are not supported in Low-area mode and will result in DECERR if received.
WARNING: [xilinx.com:ip:smartconnect:1.0-1] ultra96v2_oob_smartconnect_1_0: IP ultra96v2_oob_smartconnect_1_0 is configured in Low-area mode as all propagated traffic is low-bandwidth (AXI4LITE). SI S01_AXI has property HAS_BURST == 1. WRAP bursts are not supported in Low-area mode and will result in DECERR if received.
WARNING: [xilinx.com:ip:smartconnect:1.0-1] ultra96v2_oob_smartconnect_1_0: If WRAP transactions are required then turn off Low-area mode using ADVANCED_PROPERTIES. Execute following: set_property CONFIG.ADVANCED_PROPERTIES {__experimental_features__ {disable_low_area_mode 1}} [get_bd_cells /ultra96v2_oob_smartconnect_1_0]
WARNING: [BD 41-237] Bus Interface property WUSER_WIDTH does not match between /zynq_ultra_ps_e_0/S_AXI_LPD(0) and /SHA3_BURST_MASTER_0/M00_AXI(1)
WARNING: [BD 41-237] Bus Interface property RUSER_WIDTH does not match between /zynq_ultra_ps_e_0/S_AXI_LPD(0) and /SHA3_BURST_MASTER_0/M00_AXI(1)
WARNING: [BD 41-237] Bus Interface property BUSER_WIDTH does not match between /zynq_ultra_ps_e_0/S_AXI_LPD(0) and /SHA3_BURST_MASTER_0/M00_AXI(1)
WARNING: [BD 41-2671] The dangling interface net <m00_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m01_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m02_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m03_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m04_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m05_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m06_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m07_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m08_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m09_aw_node_M_AXIS_ARB> will not be written out to the BD file.
WARNING: [BD 41-2671] The dangling interface net <m10_aw_node_M_AXIS_ARB> will not be written out to the BD file.
Wrote  : </misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.srcs/sources_1/bd/ultra96v2_oob/ultra96v2_oob.bd> 
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/SHA3_BURST_MASTER_0/m00_axi_rid'(1) to pin: '/zynq_ultra_ps_e_0/saxigp6_rid'(6) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/zynq_ultra_ps_e_0/saxigp6_awid'(6) to pin: '/SHA3_BURST_MASTER_0/m00_axi_awid'(1) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/zynq_ultra_ps_e_0/saxigp6_arid'(6) to pin: '/SHA3_BURST_MASTER_0/m00_axi_arid'(1) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/SHA3_BURST_MASTER_0/m00_axi_bid'(1) to pin: '/zynq_ultra_ps_e_0/saxigp6_bid'(6) - Only lower order bits will be connected.
Verilog Output written to : /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.gen/sources_1/bd/ultra96v2_oob/synth/ultra96v2_oob.v
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/SHA3_BURST_MASTER_0/m00_axi_rid'(1) to pin: '/zynq_ultra_ps_e_0/saxigp6_rid'(6) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/zynq_ultra_ps_e_0/saxigp6_awid'(6) to pin: '/SHA3_BURST_MASTER_0/m00_axi_awid'(1) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/zynq_ultra_ps_e_0/saxigp6_arid'(6) to pin: '/SHA3_BURST_MASTER_0/m00_axi_arid'(1) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/SHA3_BURST_MASTER_0/m00_axi_bid'(1) to pin: '/zynq_ultra_ps_e_0/saxigp6_bid'(6) - Only lower order bits will be connected.
Verilog Output written to : /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.gen/sources_1/bd/ultra96v2_oob/sim/ultra96v2_oob.v
Verilog Output written to : /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.gen/sources_1/bd/ultra96v2_oob/hdl/ultra96v2_oob_wrapper.v
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_nodes/s00_ar_node/s_sc_payld'(181) to pin: '/s00_nodes/S_SC_AR_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_nodes/s00_aw_node/s_sc_payld'(181) to pin: '/s00_nodes/S_SC_AW_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_nodes/s01_ar_node/s_sc_payld'(181) to pin: '/s01_nodes/S_SC_AR_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_nodes/s01_aw_node/s_sc_payld'(181) to pin: '/s01_nodes/S_SC_AW_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_nodes/m00_r_node/s_sc_payld'(58) to pin: '/m00_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_nodes/m00_b_node/s_sc_payld'(12) to pin: '/m00_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_nodes/m01_r_node/s_sc_payld'(58) to pin: '/m01_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_nodes/m01_b_node/s_sc_payld'(12) to pin: '/m01_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_nodes/m02_r_node/s_sc_payld'(58) to pin: '/m02_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_nodes/m02_b_node/s_sc_payld'(12) to pin: '/m02_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_nodes/m03_r_node/s_sc_payld'(58) to pin: '/m03_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_nodes/m03_b_node/s_sc_payld'(12) to pin: '/m03_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_nodes/m04_r_node/s_sc_payld'(58) to pin: '/m04_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_nodes/m04_b_node/s_sc_payld'(12) to pin: '/m04_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m05_nodes/m05_r_node/s_sc_payld'(58) to pin: '/m05_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m05_nodes/m05_b_node/s_sc_payld'(12) to pin: '/m05_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m06_nodes/m06_r_node/s_sc_payld'(58) to pin: '/m06_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m06_nodes/m06_b_node/s_sc_payld'(12) to pin: '/m06_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m07_nodes/m07_r_node/s_sc_payld'(58) to pin: '/m07_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m07_nodes/m07_b_node/s_sc_payld'(12) to pin: '/m07_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m08_nodes/m08_r_node/s_sc_payld'(58) to pin: '/m08_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m08_nodes/m08_b_node/s_sc_payld'(12) to pin: '/m08_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m09_nodes/m09_r_node/s_sc_payld'(58) to pin: '/m09_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m09_nodes/m09_b_node/s_sc_payld'(12) to pin: '/m09_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m10_nodes/m10_r_node/s_sc_payld'(58) to pin: '/m10_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m10_nodes/m10_b_node/s_sc_payld'(12) to pin: '/m10_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_axi2sc/s_sc_r_payld'(56) to pin: '/s00_nodes/M_SC_R_payld'(58) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_axi2sc/s_sc_b_payld'(10) to pin: '/s00_nodes/M_SC_B_payld'(12) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_axi2sc/s_sc_r_payld'(56) to pin: '/s01_nodes/M_SC_R_payld'(58) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_axi2sc/s_sc_b_payld'(10) to pin: '/s01_nodes/M_SC_B_payld'(12) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_sc2axi/s_sc_ar_payld'(177) to pin: '/m00_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_sc2axi/s_sc_aw_payld'(177) to pin: '/m00_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_sc2axi/s_sc_ar_payld'(177) to pin: '/m01_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_sc2axi/s_sc_aw_payld'(177) to pin: '/m01_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_sc2axi/s_sc_ar_payld'(177) to pin: '/m02_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_sc2axi/s_sc_aw_payld'(177) to pin: '/m02_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_sc2axi/s_sc_ar_payld'(177) to pin: '/m03_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_sc2axi/s_sc_aw_payld'(177) to pin: '/m03_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_sc2axi/s_sc_ar_payld'(177) to pin: '/m04_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_sc2axi/s_sc_aw_payld'(177) to pin: '/m04_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m05_sc2axi/s_sc_ar_payld'(177) to pin: '/m05_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m05_sc2axi/s_sc_aw_payld'(177) to pin: '/m05_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m06_sc2axi/s_sc_ar_payld'(177) to pin: '/m06_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m06_sc2axi/s_sc_aw_payld'(177) to pin: '/m06_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m07_sc2axi/s_sc_ar_payld'(177) to pin: '/m07_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m07_sc2axi/s_sc_aw_payld'(177) to pin: '/m07_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m08_sc2axi/s_sc_ar_payld'(177) to pin: '/m08_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m08_sc2axi/s_sc_aw_payld'(177) to pin: '/m08_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m09_sc2axi/s_sc_ar_payld'(177) to pin: '/m09_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m09_sc2axi/s_sc_aw_payld'(177) to pin: '/m09_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m10_sc2axi/s_sc_ar_payld'(177) to pin: '/m10_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m10_sc2axi/s_sc_aw_payld'(177) to pin: '/m10_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_nodes/s00_ar_node/s_sc_payld'(181) to pin: '/s00_nodes/S_SC_AR_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_nodes/s00_aw_node/s_sc_payld'(181) to pin: '/s00_nodes/S_SC_AW_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_nodes/s01_ar_node/s_sc_payld'(181) to pin: '/s01_nodes/S_SC_AR_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_nodes/s01_aw_node/s_sc_payld'(181) to pin: '/s01_nodes/S_SC_AW_payld'(177) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_nodes/m00_r_node/s_sc_payld'(58) to pin: '/m00_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_nodes/m00_b_node/s_sc_payld'(12) to pin: '/m00_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_nodes/m01_r_node/s_sc_payld'(58) to pin: '/m01_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_nodes/m01_b_node/s_sc_payld'(12) to pin: '/m01_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_nodes/m02_r_node/s_sc_payld'(58) to pin: '/m02_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_nodes/m02_b_node/s_sc_payld'(12) to pin: '/m02_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_nodes/m03_r_node/s_sc_payld'(58) to pin: '/m03_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_nodes/m03_b_node/s_sc_payld'(12) to pin: '/m03_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_nodes/m04_r_node/s_sc_payld'(58) to pin: '/m04_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_nodes/m04_b_node/s_sc_payld'(12) to pin: '/m04_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m05_nodes/m05_r_node/s_sc_payld'(58) to pin: '/m05_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m05_nodes/m05_b_node/s_sc_payld'(12) to pin: '/m05_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m06_nodes/m06_r_node/s_sc_payld'(58) to pin: '/m06_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m06_nodes/m06_b_node/s_sc_payld'(12) to pin: '/m06_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m07_nodes/m07_r_node/s_sc_payld'(58) to pin: '/m07_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m07_nodes/m07_b_node/s_sc_payld'(12) to pin: '/m07_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m08_nodes/m08_r_node/s_sc_payld'(58) to pin: '/m08_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m08_nodes/m08_b_node/s_sc_payld'(12) to pin: '/m08_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m09_nodes/m09_r_node/s_sc_payld'(58) to pin: '/m09_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m09_nodes/m09_b_node/s_sc_payld'(12) to pin: '/m09_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m10_nodes/m10_r_node/s_sc_payld'(58) to pin: '/m10_nodes/S_SC_R_payld'(56) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m10_nodes/m10_b_node/s_sc_payld'(12) to pin: '/m10_nodes/S_SC_B_payld'(10) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_axi2sc/s_sc_r_payld'(56) to pin: '/s00_nodes/M_SC_R_payld'(58) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s00_axi2sc/s_sc_b_payld'(10) to pin: '/s00_nodes/M_SC_B_payld'(12) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_axi2sc/s_sc_r_payld'(56) to pin: '/s01_nodes/M_SC_R_payld'(58) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/s01_axi2sc/s_sc_b_payld'(10) to pin: '/s01_nodes/M_SC_B_payld'(12) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_sc2axi/s_sc_ar_payld'(177) to pin: '/m00_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m00_sc2axi/s_sc_aw_payld'(177) to pin: '/m00_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_sc2axi/s_sc_ar_payld'(177) to pin: '/m01_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m01_sc2axi/s_sc_aw_payld'(177) to pin: '/m01_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_sc2axi/s_sc_ar_payld'(177) to pin: '/m02_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m02_sc2axi/s_sc_aw_payld'(177) to pin: '/m02_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_sc2axi/s_sc_ar_payld'(177) to pin: '/m03_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m03_sc2axi/s_sc_aw_payld'(177) to pin: '/m03_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_sc2axi/s_sc_ar_payld'(177) to pin: '/m04_nodes/M_SC_AR_payld'(181) - Only lower order bits will be connected.
WARNING: [BD 41-2384] Width mismatch when connecting pin: '/m04_sc2axi/s_sc_aw_payld'(177) to pin: '/m04_nodes/M_SC_AW_payld'(181) - Only lower order bits will be connected.
INFO: [Common 17-14] Message 'BD 41-2384' appears 100 times and further instances of the messages will be disabled. Use the Tcl command set_msg_config to change the current settings.
Exporting to file /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.gen/sources_1/bd/ultra96v2_oob/ip/ultra96v2_oob_smartconnect_1_0/bd_0/hw_handoff/ultra96v2_oob_smartconnect_1_0.hwh
Generated Hardware Definition File /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.gen/sources_1/bd/ultra96v2_oob/ip/ultra96v2_oob_smartconnect_1_0/bd_0/synth/ultra96v2_oob_smartconnect_1_0.hwdef
INFO: [BD 41-1029] Generation completed for the IP Integrator block SHA3_BURST_MASTER_0 .
Exporting to file /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.gen/sources_1/bd/ultra96v2_oob/hw_handoff/ultra96v2_oob.hwh
Generated Hardware Definition File /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.gen/sources_1/bd/ultra96v2_oob/synth/ultra96v2_oob.hwdef
[Sun Mar 31 23:40:58 2024] Launched synth_1...
Run output will be captured here: /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.runs/synth_1/runme.log
[Sun Mar 31 23:40:58 2024] Launched impl_1...
Run output will be captured here: /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.runs/impl_1/runme.log
launch_runs: Time (s): cpu = 00:00:36 ; elapsed = 00:00:53 . Memory (MB): peak = 8260.410 ; gain = 0.000 ; free physical = 222564 ; free virtual = 355516
reset_run synth_1
ipx::edit_ip_in_project -upgrade true -name SHA3_BURST_MASTER_v1_0_project -directory /misc/scratch/dna664/lab3/new_baseline1/SHA3_2022.2/ultra96v2_oob.tmp/SHA3_BURST_MASTER_v1_0_project /misc/scratch/dna664/lab3/new_baseline1/ip_repo/SHA3_BURST_MASTER_1_0/component.xml
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1704] No user IP repositories specified
INFO: [IP_Flow 19-2313] Loaded Vivado IP repository '/usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/ip'.
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vek280_es:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vek280/es/1.0/board.xml as part xcve2802-vsvh1760-2lp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vhk158_es:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vhk158/es/1.0/board.xml as part xcvh1582-vsva3697-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vpk120_es:part0:1.2 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vpk120/es/1.2/board.xml as part xcvp1202-vsva2785-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vpk120_es_revb:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vpk120_revb/es/1.0/board.xml as part xcvp1202-vsva2785-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:vpk180_es:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vpk180/es/1.0/board.xml as part xcvp1802-lsvc4072-2mp-e-s-es1 specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu208ld:part0:2.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu208ld/production/2.0/board.xml as part xczu58dr-fsvg1517-2-i specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu216ld:part0:2.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu216ld/production/2.0/board.xml as part xczu59dr-ffvf1760-2-i specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu670:part0:2.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu670/2.0/board.xml as part xczu67dr-fsve1156-2-i specified in board_part file is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu670ld:part0:1.0 available at /usr/local/packages/Xilinx_2022.2/Vivado/2022.2/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu670ld/1.0/board.xml as part xczu57dr-fsve1156-2-i specified in board_part file is either invalid or not available
create_project: Time (s): cpu = 00:00:06 ; elapsed = 00:01:02 . Memory (MB): peak = 8260.410 ; gain = 0.000 ; free physical = 222555 ; free virtual = 355508
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1700] Loaded user IP repository '/misc/scratch/dna664/lab3/new_baseline1/ip_repo'.
INFO: [IP_Flow 19-795] Syncing license key meta-data
ipx::edit_ip_in_project: Time (s): cpu = 00:00:08 ; elapsed = 00:01:04 . Memory (MB): peak = 8260.410 ; gain = 0.000 ; free physical = 222548 ; free virtual = 355501
update_compile_order -fileset sources_1