|
Readme
This is the starter project for ECE319K Lab 1.
For more information about Lab 1, see
Lab 1. Introduction to Cortex M Assembly.
When running this project, the USB cable must be attached
to the PC and a terminal program (Putty or CCS terminal) must be
opened with a baud rate of 115200 bits/sec.
Derived from Texas Instrument code
- uart_rw_multibyte_fifo_poll_LP_MSPM0G3507_nortos_ticlang
- gpio_toggle_output_LP_MSPM0G3507_nortos_ticlang
|