|
Hardware Required
- MSPM0G3507 LaunchPad™ Development Kit (LP-MSPM0G3507)
- LaunchPad Tester boosterpack

Pin assignments
- Serial TxD: PA10 is UART0 Tx (MSPM0 to PC) index 20 in IOMUX PINCM table
- Serial RxD: PA11 is UART0 Rx (PC to MSPM0) index 21 in IOMUX PINCM table
- Output: PA0 is red LED1, index 0 in IOMUX PINCM table
LaunchPad Jumpers
- Remove J16 J17 J18: Disconnects light sensor from the microcontroller PA22 PA27 PA26
- J9: Remove J9: Disconnects thermistor from PB24
- J14: Connect PB23 to SW1
- J15: Connect PA16 to SW2
- J4: Connects PA0 to red LED
- J21: Connects PA10 to XDS_UART
- J22: Connects PA11 to XDS_UART
|