ECE319K Fall 2024
TAs hand out one bag to each student during the board demo.
Extra bags should be put into the Cabinet.

Qty  Item   
1    plastic bag                 
2    Green  LED 1.7V 2mA 5mm, Broadcom, HLMP-4740, Mouser 630-HLMP-4740
2    Red    LED 1.8V 2mA 5mm, Broadcom, HLMP-4700, Mouser 630-HLMP-4700
2    Yellow LED 1.9V 2mA 5mm, Broadcom, HLMP-4719, Mouser 630-HLMP-4719
6    Resistor, 1/4W 5%, 470 ohm,  Mouser 279-CFR16J470R
4    Resistor, 1/4W 5%, 10K ohm,  Mouser 279-CFR16J10K        
5    Resistor, 1/4W 5%, 12K ohm,  Mouser 279-CFR16J12K        
5    Resistor, 1/4W 5%, 1.5K ohm, Mouser 279-CFR16J1K5        
0    B3F tactile switch, yellow, Omron B3F-1052, Digikey SW405-ND  or Mouser 653-B3F-1052  
4    B3F tactile switch, white, Omron B3F-1050, Digikey SW404-ND or   Mouser 653-B3F-1050
1    Slide potentiometer Bourns PTA2043-2015CPB103 Mouser 652-PTA20432015CPB10 or 652-PTA2432015DPB103
1    32-ohm 28-mm speaker PUI Audio AS02832MR-2-R  Mouser 665-AS02832MR2R
ECE319K students buy their own protoboard, wires, and ST7735R. The speaker will require two solder joints.