Kit buying instructions for Europe
Purchase the microcontroller board
Please order either a Stellaris Launchpad (EK-LM4F120XL) or a Tiva Launchpad (EK-TM4C123GXL) from one of the distributors listed below or one of the distributors listed on the Worldwide page. All the projects we will develop in these course will run on both these microcontroller boards. The boards may or may not be available at the regional distributors listed below.
Extra electronic parts
Farnell element14 shopping cart
All parts prices are listed in British Pounds (£,GBP). Make sure to select your correct region for accurate pricing.
Quantity |
Description |
Manufacturer |
Manufacturer Part |
|
Unit
cost |
Cost |
1 |
Solderless breadboard + wires |
Twin Industries |
TW-E41-1020 |
2213347 |
£10.30 |
£10.30 |
2 |
Green LED 1.8V 2mA 5mm |
VISHAY |
TLLG5401 |
1045509 |
£0.18 |
£0.89 |
2 |
Red LED 1.8V 2mA 5mm |
VISHAY |
TLLR5401 |
1045508 |
£0.12 |
£0.58 |
2 |
Yellow LED 1.8V 2mA 5mm |
VISHAY |
TLLY5401 |
1045510 |
£0.10 |
£0.51 |
6 |
Carbon 1/4W resistor, 5%, 470 |
PANASONIC |
ERG12SJ471 |
2324473 |
£0.10 |
£0.63 |
1 |
Carbon 1/4W resistor, 5%, 1.0k |
PANASONIC |
ERG12SJ102 |
2324439 |
£0.10 |
£0.10 |
3 |
Carbon 1/4W resistor, 5%, 1.5k |
PANASONIC |
ERG12SJ152 |
2324448 |
£0.10 |
£0.30 |
3 |
Carbon 1/4W resistor, 5%, 12k |
PANASONIC |
ERG12SJ123 |
2324445 |
£0.10 |
£0.30 |
4 |
Carbon 1/4W resistor, 5%, 10k |
PANASONIC |
ERG12SJ103 |
2324440 |
£0.10 |
£0.40 |
4 |
B3F push button switch |
OMRON |
B3F-1052 |
1960942 |
£0.41 |
£1.64 |
1 |
Stereo Jack 3pin 3.5mm |
MULTICOMP |
SPC24110 |
2112339 |
£0.83 |
£0.83 |
1 |
Slide Potentiometers 15mm |
BOURNS |
PTA6043-2015DPB103 |
1688411 |
£1.36 |
£1.36 |
|
|
|
|
|
Total |
£17.82 |
You can order the extra electronic parts for this class either from the Farnell element14 cart above, from the Worldwide page or from one of the local distributors listed below.
- Please make sure to order the following:
-
- 1 Solderless breadboard (400+ holes) + wires
- 2 Green through hole LED's (1.6V-2V,2mA or less)
- 2 Red through hole LED's (1.6V-2V,2mA or less)
- 2 Yellow through hole LED's (1.6V-2V,2mA or less)
- 6 470ohm 1/4W 5% resistors (1/2W or less, 10% or less)
- 1 1Kohm 1/4W 5% resistor (1/2W or less, 10% or less)
- 3 1.5Kohm 1/4W 5% resistors (1/2W or less, 10% or less)
- 3 12Kohm 1/4W 5% resistors (1/2W or less, 10% or less)
- 4 10Kohm 1/4W 5% resistors (1/2W or less, 10% or less)
- 4 Push button switches (B3F tactile, breadboard-able)
- 1 Mono or stereo headphone jack (breadboard compatible)
- 1 Slide potentiometer (5-50K, breadboardable, 1-5cm slide)
Regional Distributors sourced from www.seeedstudio.com