Oceania

Purchase the microcontroller board

Please order either a Stellaris Launchpad (EK-LM4F120XL) or a Tiva Launchpad (EK-TM4C123GXL) from one of the distributors listed below or one of the distributors listed on the Worldwide page. All the projects we will develop in these course will run on both these microcontroller boards. The boards may or may not be available at the regional distributors listed below.

Extra electronic parts

element14 shopping cart

This page is maintained by our friends at element14 with the appropriate products and lowest prices automatically selected based on your location. Products are sourced from warehouses in Singapore and Australia. Although we’ve done our best to source products from your local warehouse, if you see products in your cart with higher shipping costs, please search the site for substitutes available locally..

DIY option

You can order the extra electronic parts for this class either from the Worldwide page or from one of the local distributors listed below.

Please make sure to order the following:

• 1 Solderless breadboard (400+ holes) + wires
• 2 Green through hole LED's (1.6V-2V,2mA or less)
• 2 Red through hole LED's (1.6V-2V,2mA or less)
• 2 Yellow through hole LED's (1.6V-2V,2mA or less)
• 6 470ohm 1/4W 5% resistors (1/2W or less, 10% or less)
• 1 1Kohm 1/4W 5% resistor (1/2W or less, 10% or less)
• 3 1.5Kohm 1/4W 5% resistors (1/2W or less, 10% or less)
• 3 12Kohm 1/4W 5% resistors (1/2W or less, 10% or less)
• 4 10Kohm 1/4W 5% resistors (1/2W or less, 10% or less)
• 4 Push button switches (B3F tactile, breadboard-able)
• 1 Mono or stereo headphone jack (breadboard compatible)
• 1 Slide potentiometer (5-50K, breadboardable, 1-5cm slide)

	Australia
	Australia
	Australia
	Australia
	Australia
	New Zealand
	New Zealand

Regional Distributors sourced from www.seeedstudio.com